HDPE Sprinkler Pipes
Nircon manufactures high quality HDPE Sprinkler Pipes with various unique advantages as compared to traditional pipes. These low maintenance, high durability pipes allow efficient, hassle-free sprinkler set ups.
Advantages
|
Economical as compared to traditional pipe materials |
Very good thermal insulation due to low thermal conductivity |
|
Resistant to chemicals – exceptional resistance to internal and external corrosion |
Smooth bore for minimal head loss, approximately 30% lower flow resistance than conventional pipes allows use of small bore pipe for a given rate of flow |
|
Resistant to electrolytic corrosion |
No risk of ageing because of perfect stability or material |
|
Does not rust or rot |
Completely neutral towards products conveyed |
|
Welded joints speed up installation, reduced trench widths lead to saving in the cost of excavation and back filling |
Low maintenance cost
|
|
Very light weight – one-sixth the weight of steel, allows easy transportation, handling and fitting |
East to install
|
|
Longer life than GI, MS, Cement and other pipes |
|
Features:
Applications
|
Potable water supply |
Irrigation/agriculture |
Gas Transmission |
|
Industrial Effluents |
Telephone Cable Duction |
Sewerage & Drainage |
|
Sprinkler System |
Slurry Transportation |
Chemical Industries |
|
Tubewells |
|
|
Dimension of HDPE Sprinkler Pipes
|
Nominal
Diameter |
Outside
Diameter |
Nominal Tolerance
on Outside Diameter |
Class 1
|
Class 2
|
||
|---|---|---|---|---|---|---|
|
Min.
|
Max.
|
Min.
|
Max.
|
|||
|
63 mm
|
63 mm
|
+0.6
|
-
|
-
|
2.00
|
2.40
|
|
75 mm
|
75 mm
|
+0.7
|
2.00
|
2.40
|
2.50
|
2.90
|
|
90 mm
|
90 mm
|
+0.8
|
2.20
|
2.60
|
2.90
|
3.40
|
|
110 mm
|
110 mm
|
+1.0
|
2.70
|
3.20
|
3.40
|
3.90
|